Should Bathroom Vanities be Mounted to the Wall?

 

If you're remodeling your bathroom, you undoubtedly have a few concerns. The big question: Is it necessary to mount a bathroom vanity to the wall. Since a freestanding vanity isn't likely to move, there is no need to attach it to the wall while installing one. However, the immediate answer is quite different, and we will go into more detail about this below.

Do Vanities Need to Be Mounted to the Wall?

The straight response is almost always YES; you should attach your vanity to the wall. In addition, there should be no space between the back of the vanity and the wall. This serves to conceal and safeguard your plumbing.

The plumbing generally runs through the wall behind the sink, covered by the vanity's cabinet. Without being anchored to the wall, a vanity could move over time or as a result of an accidental collision. If that occurs, the plumbing may be stressed because the sink is connected to the vanity and pipes. Your supply lines and drainpipes may bend, which may result in leaks at the joints.

 

Are There Any Exceptions?

An exception to this rule applies if all of the plumbing enters through the floor as opposed to the wall. Even so, it’s possible to attach the vanity because you can install it flush against the wall somehow.

Again, the goal is to maintain the plumbing's stability in the event that the vanity moves. But occasionally, bathroom vanities are not put up against a wall.

Vanities may very seldom be in the center of a room; usually in spacious bathrooms where there is little need to conserve space. These vanities are referred to as "bathroom islands" in these situations. Sometimes contemporary designers will place vanities up against glass shower walls.

These are the only two uncommon design choices in which vanity would not be attached to a wall. They should instead be secured to the floor to prevent movement.

 

How Do You Mount Your Vanity?

This is determined by the type of vanity you select. With a few straightforward L-brackets hidden inside the cabinet, you may secure a freestanding vanity that extends from the floor to the wall (or the floor).

Installing bracing so that you can hang a floating vanity will be necessary. In either scenario, use a stud finder to find the studs in the wall before you start. This is where fasteners should be placed to prevent them from pulling out of the wall. You could use mollies to anchor the vanity if the studs don't line up with it.

Are you in the market for new bathroom vanities? There are so many different styles available now, ranging from traditional to contemporary. You may get freestanding or floating vanities at Bath Trend USA, as well as a few items that can help you build a bathroom island. Find the ideal vanity for your upgrade by browsing our inventory!